Place of Origin:
Automatic centrifugal oil filterThe machine uses the principle of centrifugation to stratify different materials at high speeds of the motor. At the time of filtration, the specific gravity of the impurities in the oil is smashed at the outermost layer, and the oil is at the innermost layer.When the motor stops running, the oil will flow out and the filter residue will be attached to the wall of the inner cylinder. The machine has fast filtering speed, saving time and effort and saving electricity. No need to save consumables to replace filter cloth costs
1. Advanced molecule demulsification filter element instead of traditional additive and glass fiber demulsification.
2. Coalescence separation technology ordinary pressure.
3. Special vacuum negative pressure dehydration system.
4. Purification: nets filtering combined with macromolecule adsorption.
5. It takes about 3-5 minutes one time,high speed.
Centrifugal oil filter It is a method of separating suspended impurities by centrifugal force. By using the high-speed rotation of the centrifugal head, the oil, water and impurities in the lubricating oil with different degrees of contamination are quickly separated by different centrifugal forces. When the drum stops rotating, the net oil flows out from the drum for filtration purposes. The filtered oil can be tested at the time, no foaming, no overflowing
1. we have two model of this oil filter machine.
2. If you have other needs, we can also customize for you.
Vacuum oil filter is mainly used for edible oils such as peanut oil, rapeseed oil, soybean oil, corn oil and sesame oil.
1, the filtration speed is fast, can be filtered 4-5 times per hour, can process 25-30 kg or 40-50 kg each time, easy to operate.
2. Compared with other equipment, long-term use does not require any consumables, including filter cloth cleaning and filter cloth cleaning.
3. Power saving, start the power supply, add the oil, rotate at high speed, use the centrifugal force generated by the drum to filter the oil, disconnect the power supply, and the net oil flows out after the drum is stationary.
4, the use effect is better than all other filtering equipment, such as the trouble of replacing the filter cloth and filter cloth with the frame filter oil filter, the danger of pressure filtration overpressure detonation and the defect that the sludge is too much to open repeatedly, use this centrifugal filter The machine has no consumables to purchase, saves electricity and saves time, has good effect, high oil purity, clear color, can be directly sold in cans or directly consumed.
1. Close the power supply When the motor is running normally, pour the stirred oil into the oil spill hopper, and then run for 30 seconds. After the power is turned off and the drum stops rotating, the pure oil will automatically flow out from the oil pipe.
2, different raw materials, hair oil can adjust the rotation time of the drum to lengthen or shorten.
3. Before cleaning the oil residue, the drum must be rotated and stopped to clean the oil residue.
4, raw materials, crude oil slag clarity is not the same, clean up the oil residue can be cleared one or two times.
5. This machine is equipped with brake device. When the power is disconnected, the drum can not be stopped when the drum rotates. It is necessary to adjust the brake lever to brake slowly, otherwise the oil reverse will not be clear.
6. When cleaning the oil residue, first unload and remove the three bolts on the outer barrel, lift the upper cover, unload and remove the three bolts on the inner barrel, lift the cover, and use the shovel to clean the oil residue on the inner wall of the barrel.
7. After a period of time, unload the nylon disc bolt in the center of the inner barrel and then pull up the inner barrel mouth. After the inner barrel is raised, clean the inner bottom of the outer barrel to overflow the fine slag, and then install the inner barrel.
8. Pay special attention to cleaning the oil residue. The inner and outer barrel lids must be installed and bolted. Otherwise, the oil machine cannot be started
We have our own factories and warehouses, we can guarantee the quality of the products, the warehouse has a large inventory, if you have any needs, you can contact us at any time, we will provide you with the best quality and service.
Packaging & Shipping
We use a wooden box to wrap the machine, which is wrapped in a layer of film and then placed in a wooden box to prevent the machine from wearing out. If there are other packaging requirements, we can customize it for you.
1. What should I do, if I do not know how to use the model?
We have machine operation video and paper manual for you study before putting into usage.
2. Do I need assemble the machine when it reach to my place?
No need, the machine is installed before shipment.
3. How to choose the suitable model for my business?
Tell us your requirement for machine and our sales team will work with engineer to outline the best model for you.
4.How long is the delivery time?
For normal orders, we can send within 5 days after we get the deposit. If it is a very large order, the delivery time may be a little longer.
5. Does your factory accept customization?
As a professional manufacturer, we can do almost any kind of customization
Send your inquiry directly to us